Results 1 to 7 of 7

Thread: Sb 00019

  1. #1
    Member Pokette's Avatar
    Join Date
    Jul 2010
    Location
    St. Louis Missouri
    Posts
    88

    Default Sb 00019

    I was wondering why the Service Bullien? Did someone have a fuel line break?
    In addition, for me, pictures are worth a thousand words. Maybe Pete or someone could post a picture of the area we are inspecting. Thanks for the help.
    Last edited by Pokette; 02-01-2012 at 01:02 PM.
    Diana Votaw
    N110CV


  2. #2
    Administrator Pete D's Avatar
    Join Date
    Jan 2010
    Location
    Yakima, WA
    Posts
    1,158

    Default Re: Sb 00019

    Diana,

    There have been no leaks as far as I have been able to find out. They are just trying to head off a potential problem. I think that a couple of planes may have had chaffing in that area. I will try to get a photo up in the next few days.

    Pete D.

  3. #3
    Senior Member
    Join Date
    Jan 2010
    Location
    Edgewood, Texas
    Posts
    214

    Default Re: Sb 00019

    Can an owner sign off this SB or does an A&P have to do it? Jon

  4. #4
    Member Pokette's Avatar
    Join Date
    Jul 2010
    Location
    St. Louis Missouri
    Posts
    88

    Default Re: Sb 00019

    Thanks Pete, hope to see the picture soon.
    Diana Votaw
    N110CV


  5. #5
    Senior Member Clay Hammond's Avatar
    Join Date
    Feb 2010
    Location
    Salmon River Airfield, 9B8
    Posts
    280

    Default Re: Sb 00019

    Agree 100%. Need pictures. Doing this to a SPORT CUB right now and the SB is just vague enough in placement of the relief cover to make one question where it goes. Post a picture!

  6. #6
    Administrator Pete D's Avatar
    Join Date
    Jan 2010
    Location
    Yakima, WA
    Posts
    1,158

    Default Re: Sb 00019

    Thanks for the reminder Clay, hope this helps.

    The factory installed part I believe is the same part that is shipped in the SB kit. It is installed with the lip on the outside of the baggage versus the whole thing installed on the inside of the baggage if it is installed in the field. The reason being, at the factory this is put onto the baggage side before it goes into the airplane; much better access. So location is the same but you will see the flange on the top and bottom.

    DSCF3151.jpg

    Factory installed, extended baggage.

    DSCF3152.jpg

    Factory installed, extended baggage, different angle.

    DSCF3153.jpg

    Factory installed, standard baggage.
    Pete Dougherty
    Customer Support Manager
    Cub Crafters Inc

  7. #7
    Senior Member Clay Hammond's Avatar
    Join Date
    Feb 2010
    Location
    Salmon River Airfield, 9B8
    Posts
    280

    Default Re: Sb 00019

    Perfect. Thanks!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •