Results 1 to 9 of 9

Thread: Catto props

  1. #1
    Senior Member Dan L's Avatar
    Join Date
    Jul 2010
    Location
    Montana
    Posts
    766

    Default Catto props

    I have two Catto props for sale:

    1) 80" x 50" with red trim and nickle leading edge. This is the current standard issue prop for the O-340 from Cub Crafters. This one has about 400 hours on it and is in excellent condition. New they're $2950 - will sell for $2500.

    IMG_1349.jpg

    1) 78" x 54" silver color and made prior to the installation of the nickle leading edge. This prop has 150.0 hours on it. This prop combination was the original issue prop for the first Carbon Cubs with the O-340. Excellent condition. $1250.

    DSCN1963.jpg

    Crush plate and bolts not included
    Attached Images Attached Images
    Flying Carbon Cub EX #11 since 2011

  2. #2
    Senior Member Dan L's Avatar
    Join Date
    Jul 2010
    Location
    Montana
    Posts
    766

    Default Re: Catto props

    The 78"x54" silver prop is sold.

    Thanks for looking.
    Flying Carbon Cub EX #11 since 2011

  3. #3
    Senior Member Dan L's Avatar
    Join Date
    Jul 2010
    Location
    Montana
    Posts
    766

    Default Re: Catto props

    I am lowering the price of the 80x50 prop to $2250. This prop has 450.1 hours on it. This is a great buy on the go-to prop for the CC-340 engine with not many hours on it. With shipping these are over $3000 from Catto.

    Send a PM if interested.
    Flying Carbon Cub EX #11 since 2011

  4. #4
    Senior Member TroyBranch's Avatar
    Join Date
    May 2015
    Location
    Calgary Alberta Canada
    Posts
    313

    Default Re: Catto props

    Curious, What prop are you using now?

  5. #5
    Senior Member Dan L's Avatar
    Join Date
    Jul 2010
    Location
    Montana
    Posts
    766

    Default Re: Catto props

    Quote Originally Posted by TroyBranch View Post
    Curious, What prop are you using now?
    An 84x42.5. A little quicker takeoff performance. But as always there's a trade off and with this low pitch prop it is a lower cruise speed.
    Flying Carbon Cub EX #11 since 2011

  6. #6
    Senior Member chipallen's Avatar
    Join Date
    Jan 2010
    Location
    Marietta, GA
    Posts
    802

    Default Re: Catto props

    I assume this prop is in "like new" condition with good paint (what color?), and no nicks or scratches? I need a spare prop but can't put more than $1,500 into it. If you decide on a "fire sale", let me know. Thank you.

    Chip Allen

    SWT Aviation, Inc.
    Cubcrafters Southeast Sales Center
    Marietta, GA

  7. #7
    Senior Member 40m's Avatar
    Join Date
    Sep 2013
    Location
    Shoreham, VT
    Posts
    394

    Default Re: Catto props

    Quote Originally Posted by chipallen View Post
    I assume this prop is in "like new" condition with good paint (what color?), and no nicks or scratches? I need a spare prop but can't put more than $1,500 into it. If you decide on a "fire sale", let me know. Thank you.
    Asking for a 33% discount, I like it. Let me know when you are selling a "like new" FX.

  8. #8
    Senior Member Dan L's Avatar
    Join Date
    Jul 2010
    Location
    Montana
    Posts
    766

    Red face Re: Catto props

    You can see the colors in post #1 below, the first picture.

    Is is it in like new condition? No, I wouldn't call it that. The front side of the prop and leading edge look new, very clean and Nick free. The back side of the blades show the usual bug splatters and a few tiny spots of missing flat black paint. I cleaned it up but there are still some streaks on the back side.

    Nearly new looking - yes. Like new - no.

    Quote Originally Posted by 40m View Post
    Asking for a 33% discount, I like it. Let me know when you are selling a "like new" FX.
    Actually $1500 would be 50% of the new price.

    I'd keep it for a spare too but I find as I get older that if I don't part with something when I replace it that I seem to collect too much stuff. I thought it would make a good prop for someone putting together an EX2 or as a replacement for one of the original Catto 76x53 props that came with the first EXs and Carbon Cubs. That's what I did when I bought this 80x50.
    Last edited by Dan L; 10-01-2016 at 04:56 AM.
    Flying Carbon Cub EX #11 since 2011

  9. #9
    Senior Member Dan L's Avatar
    Join Date
    Jul 2010
    Location
    Montana
    Posts
    766

    Default Re: Catto props

    SOLD

    September 2017



    Quote Originally Posted by Dan L View Post
    I am lowering the price of the 80x50 prop to $2250. This prop has 450.1 hours on it. This is a great buy on the go-to prop for the CC-340 engine with not many hours on it. With shipping these are over $3000 from Catto.

    Send a PM if interested.
    Just thought I'd bump this up to see if there's any interest?

    Thanks,

    Dan
    Last edited by Dan L; 09-23-2017 at 11:45 AM.
    Flying Carbon Cub EX #11 since 2011

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •